Back to Blog
Product Reviews 2026-11-15 clast.com.au 0 views

SIG WHISKEY3 4-12X40 QuadPlex: Reticle and Turret FAQ

SIG WHISKEY3 4-12X40 QuadPlex: Reticle and Turret FAQ

Answers to the questions buyers ask about the SIG WHISKEY3 4-12X40 QuadPlex: reticle choice, 0.25 MOA clicks, turret tracking, tube size and zeroing.

Reticle questions

What is the QuadPlex reticle in the SIG WHISKEY3 4-12X40?
The catalog lists the reticle as Quadplex. It sits in the second focal plane (SFP), so the reticle size stays constant as you change magnification rather than growing with the zoom. The supplied information does not include a subtension chart or holdover values for this reticle, so treat it as a conventional aiming crosshair and check the manufacturer's reticle diagram before relying on any part of it for holdover.
QuadPlex vs BDC: which reticle should I choose?
The QuadPlex is the simpler option in the supplied catalog: a straightforward aiming reticle with no listed illumination settings or battery requirement. A BDC-style reticle is designed around bullet-drop compensation, but the supplied record for this scope does not include BDC subtension data, so we cannot confirm drop values for a BDC variant here. If you want to dial elevation for distance rather than hold over, the QuadPlex pairs naturally with the exposed 0.25 MOA adjustments. If you prefer to hold over, ask for the reticle diagram before you buy.
Does the QuadPlex reticle illuminate?
The supplied information does not confirm illumination for this model. The record lists illumination settings as blank and the battery field as N/A, and it notes that HellFire illumination is available on select models rather than this one specifically. Do not assume this scope has an illuminated reticle; confirm with the seller if that feature matters to you.
Why does second focal plane matter here?
In an SFP scope the reticle stays the same apparent size across the 4-12x range, which keeps the view uncluttered at low power. The tradeoff is that any reticle-based holdover would change with magnification, and since the supplied record gives no subtension values, the practical approach is to use the QuadPlex as an aiming point and use the turrets for correction.

Adjustment and turret questions

What does 0.25 MOA adjustment mean in practice?
Each click moves point of impact by 0.25 MOA, which is a quarter of a minute of angle. The catalog also lists 12 MOA of travel per rotation, so a full turn of the turret covers 12 MOA in 48 clicks. That combination gives you fine, repeatable steps for zeroing and for dialing correction. The record does not state whether the clicks are audible or tactile, so check that in person if it matters to you.
How much elevation and windage travel does it have?
The supplied record lists 60 MOA of total elevation travel and a windage travel figure that is present in the catalog but not given a numeric value in the supplied extract. Confirm the windage number with the seller before planning a long-range dialing setup. The 60 MOA elevation figure is the number to compare against your intended distance and cartridge.
How do I check turret tracking on a WHISKEY3?
Tracking means the reticle moves the amount the turret says it does. The supplied information does not include a manufacturer tracking test procedure, so we will not invent one. A practical approach many shooters use is a tall-target or box test at a known distance: fire a group, dial a known number of clicks in elevation and windage, fire again, and compare the actual shift with the expected 0.25 MOA per click. If the shift does not match, stop and contact the manufacturer rather than continuing to dial.
Can I reset the turrets to zero after sighting in?
The supplied record does not describe a zero-reset or zero-stop feature. Do not assume you can slip the turret caps to zero without instruction. If zero reset matters to you, ask the seller or check the manufacturer's manual for this exact model before relying on it in the field.

Mounting, tube and zero questions

What are the benefits of a 1-inch scope tube?
A 1-inch main tube is the traditional size, and the catalog lists this scope as a 1-inch tube. The practical benefits are a lighter, lower-profile package and compatibility with the broad base of standard 1-inch rings. The tradeoff compared with larger tubes is less internal adjustment range, which is why the 60 MOA elevation figure matters. The supplied record does not confirm which ring height or mounting hardware you need, so match rings to your rifle and the 1-inch tube.
What magnification and objective size does this scope have?
The catalog lists 4-12x magnification with a 40 mm objective lens. That is a medium-to-long-range configuration in a relatively compact objective, which suits traditional hunting rifles and MSR/AR platforms according to the product description. A 40 mm objective keeps the scope lower and lighter than a larger objective, at the cost of some low-light capability.
How should I zero the WHISKEY3 4-12X40?
The supplied record does not include a zeroing procedure, so follow the manufacturer's manual rather than a generic routine. What the catalog does tell you is the adjustment language: 0.25 MOA per click and 12 MOA per rotation. Use those numbers to calculate your corrections, and remember the scope is SFP, so zero at the magnification you plan to use most or confirm the reticle behavior at other powers.
Is the scope weatherproof?
Yes, according to the catalog. It is IPX-7 rated for complete immersion up to 1 meter and is fog-proof, with a nitrogen internal gas purge. Those ratings describe the scope's environmental sealing, not a recommendation to submerge it. The supplied record does not include care instructions, so follow the manufacturer's guidance for cleaning and storage.

Catalog figures behind these answers

Related Articles

Customer Service
Home
Products
Cart
Profile